Sea Ray 425 Sundancer Owner's Manual Page 180

  • Download
  • Add to my manuals
  • Print
  • Page
    / 192
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 179
8.12
SECTION 8 • REQUIRED INSPECTION, SERVICE AND
MAINTENANCE
40 Sundancer
®
(425 Sundancer
®
)
QUICK REFERENCE CHECKLIST (CONTD)
3. Ignition ..................................................................... Depress ENGINE STOP switches on the helm switch
panel when engines are cooled down.
4. Engine Operation .................................................... Check idle and shift. Listen for abnormal noises
E. SECURING THE BOAT
GENERAL
1. Shore Power Cable ................................................ Connected to dockside power inlet
2. Lines and Fenders .................................................. Fenders in place, lines tied securely to dock
BOAT SYSTEMS
1. Seacocks ................................................................ Closed (handle perpendicular to hose)
2. Helm Switch Panel ................................................. All switches in the OFF position
3. Gearshift & Throttle Controls .................................. In the NEUTRAL and IDLE positions
ENGINE
1. Ignition .................................................................... Switched in the OFF position (lights off) and master
ignition keys removed from DC distribution panel
2. Battery Switches ..................................................... In the OFF position
1. Fuel Valves (Diesel Only)....................................... Closed (handle perpendicular to hose)
F. I F THE ENGINE DOES NOT START
NO STARTER MOTOR RESPONSE
1. Check gearshift/throttle control levers in the NEUTRAL positions
2. Check battery condition for sufficient charge
3. Check battery cable connections tight and free from corrosion
4. Check battery switches in the ON position
5. Check starter motor and solenoid connections
6. Check ignition switch connections
STARTER MOTOR RESPONDS, BUT NO IGNITION
1. Check that fuel tanks are not empty
2. Check fuel filters and filter/water separators clean
3. Check electrical connections on engine wiring harness and ignition wiring
Page view 179
1 2 ... 175 176 177 178 179 180 181 182 183 184 185 ... 191 192

Comments to this Manuals

No comments