Sea Ray 425 Sundancer Owner's Manual Page 56

  • Download
  • Add to my manuals
  • Print
  • Page
    / 192
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 55
40 Sundancer
®
(425 Sundancer
®
)
2.22
SECTION 2 • GENERAL BOAT ARRANGEMENT
SMARTCRAFT SYSTEM
(FIG. 2.22.1)
SEA RAY NAVIGATOR (OPTIONAL)
(FIG. 2.22.2)
+
PWR
NAVIGATOR
H. SMARTCRAFT
Standard on your boat is the SmartCraft™ System,
located in the center of the gauge panel at the helm.
The SC5000 System View Display is a
comprehensive boat information center. This system
allows the boat operator to monitor a wealth of
critical operational information which is displayed
clearly and instantly at the helm.
The system monitors water temperature and
depth, engine trim, boat speed, steering angle,
system preventive maintenance reminders, and
systems diagnostics.
In addition the system can be integrated with the
boat’s GPS, If equipped, to provide up to the minute
course, speed, and fuel-to-destination information.
SYSTEM CALIBRATION (FOR FIRST TIME USE)
When using SmartCraft
TM
System View for the first
time the system must be calibrated before normal
use.
NOTE:
The detailed information listed which is
standard on some models may be optional on
others, or may not be available on some models
based on engine and system configuration.
REFER TO THE SMARTCRAFT™
SYSTEM VIEW
OWNER’S MANUAL IN THE OWNER’S PACKET FOR
ALL SMARTCRAFT™ OPERATING INSTRUCTIONS.
I. SEA RAY NAVIGATOR (SRN) (OPTIONAL)
Your boat may be equipped with the optional Sea
Ray Navigator. The SRN, located in the center of
the gauge panel at the helm, is an onboard computer
touch screen navigation aid capable of navigating
you through the waters and your boat.
Some features include:
Sea Ray Navigator (Charts, GPS and
Navigation)
Contour (Contour and Depth of Ocean Floor)
Tides & Currents (For your location &
destination)
Weather (Satellite)
Virtual captain (Owner’s Manual)
Help (Sea Ray Navigation Owner’s Manual)
(NOTE: Chart and contour data for your area may
need to be installed. Maptech
®
is continually
updating software and systems. Some other
features may also be under development and not
yet installed at time of purchase. Refer to the SRN
owner’s manual in the owner’s packet for all SRN
operating instructions.)
To turn ON the SRN press the “PWR” switch on
the face of the unit. Under normal operating
conditions the power switch on the SRN power
supply under the helm should be left in the ON
position.
Page view 55
1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 191 192

Comments to this Manuals

No comments